Setup - Graham Field JOHN BUNN Neb-u-Tyke Bella the Butterfly Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SeTUP

Info: Before initial operation, clean the nebulizer
cup assembly following the instructions given in
MAINTENANCE/Cleaning the Nebulizer Cup.
WARNINg: ensure that the nebulizer compressor is
unplugged during setup.
1. Before each use, inspect the compressor and nebulizer
cup assembly for damage or wear; replace as needed.
2. Place the compressor on a table or other flat stable
surface (not on the floor), in an area that is clean and
dust-free. Be sure you can easily reach the controls
when seated.
3. Open the nebulizer medication cup: Twist the cap
counter-clockwise until it stops, then lift cap off.
4. Pour the prescribed medication into the nebulizer
medication cup. Do not fill with more than 5 ml per
treatment.
5. Install cap on cup. Turn clockwise
to tighten.
6. If using the mouthpiece for
treatment, proceed to step 7. If
using a mask, install the bottom
part of the mask directly onto the
top of the nebulizer medication
cup cap as shown at right.
Proceed to step 8.
7. Install mouthpiece onto top of
nebulizer medication cup cap.
Bella the Butterfly Nebulizer Compressor
cap
cup
install cap
on cup
mask
cap
install mask
on cap
mouthpiece
cup
install
mouthpiece
on cap
9

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Jb0112-071

Tabla de contenido