Babyhome Emotion Instrucciones Para El Uso página 17

/
ASSEMBLY INSTRUCTIONS
Press the PUSH button shown
in the close-up of illustration 1
to unblock the folding obstructer.
Unfold or rotate the lower and
upper chassis in the direction
shown in illustration 1. When it
reaches the final position you will
hear a click on both sides of the
chassis (illustration 2). Make
sure that both obstructers are in
the right position before using the
pushchair.
To attach the wheels, put the
wheel axel inside its slot (illustra-
tion 3) and check that it is prop-
erly in place. Make sure you hear
a click that tells you it is in the
right position. You must assemble
the wheels in the right position
and distinguish between the front
wheels (illustration 3a) and back
wheels (illustration 3b).
Finally, place the hood on the
chassis. The pieces used to at-
tach the hood should be secured
in the position showed in illustra-
EN
tion 4. Use the Velcro located
17
behind the seat to attach this
piece.
Every time before using the
pushchair, check that it has been
properly unfolded and secured.