Installation - HAMPTON BAY BPT18-34ALE-2 Guía De Uso Y Cuidada

Installation

1
Determining joist width
□
Measure the distance from the center of the two ceiling
joists where you will be installing the ventilation fan.
2
Suspension bracket installation
□
For ceiling joist installations under 20 in., insert suspension
bracket I (D) into the fan body (A). Proceed to step 3.
□
For ceiling joist installations between 20 in. and 24 in.,
insert suspension brackets I (D), II (E), and III (F). Proceed to
step 4.
□
Use the screw (EE) to secure the suspension bracket (D) to
the fan body (A).
□
Use the screws (DD) to secure the suspension brackets (E
and F) to the fan body (A).
□
Suspension brackets I (D) and II (E) should be secured at
the same side joint.
A
F
DD
NOTE: Sliding hanger bars are provided to allow for
accurate positioning of the main body between joists.
EE
D
E
6
3
Joint installation under 20 in.
□
Use four long wood screws (BB) to attach the main body of
the fan to the ceiling joists.
□
Ensure the main body is level and square to the joists.
□
Tighten all screws.
BB
CAUTION: Do not mount the fan flush against the joist.
The flange should be flush with the ceiling board.
BB