Operation; Counting Operation; Adjusting Counterfeit Detection Features - AccuBANKER Silver S2500 Manual De Usuario

4.1 Counting Operation

-
Turn on the equipment by pressing the power switch.
-
The unit will immediately proceed with a self-check routine to confirm the
proper functioning of its main components. If any error message is reported, go to
the Error Messages section of this guide to identify its cause.
-
Select the detection functions MG-UV-DD (MG - UV only available on models
with counterfeit detection).
-
Select other optional functions such as BATCH, MANUAL, etc.
- Place the bills in an orderly manner on the hopper tray and the unit will
start counting automatically.
NOTE: If the unit is in MANUAL mode, press START to begin counting.

4.2 Adjusting Counterfeit Detection Features

The user may need to adjust the sensitivity of the MG-UV-DD-LEVEL detection
functions based on the particular characteristics of the bill being counted. To
change these values, the operator must press the key of the desired function for 3
seconds until the display shows the current value of that function. The user can
then set the desired sensitivity level using the numeric keys on the control panel.
The sensitivity can be adjusted in the range of 1-9 with 1 being the lowest level
and 9 being the highest sensitivity level. Press START to save those changes and
exit the adjustment menu.
NOTE: If there are frequent error messages related to the UV and MG functions
(A0-A1-b), consider reducing the sensitivity of these functions since they could
be at values ​ ​ a bove the one suitable for the currency being counted.
11

4. Operation

(UV and MG/UV model)