Troubleshooting - BLACK&DECKER TR016 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

90548247 TR016 etc htrimmers

CAUTION: Do not use the trimmer for cutting stems greater than its capacity.

TR016, TR017 3/8 in.(5mm).

HT012, HT018 5/8 in.(8mm).

HT020, HT512, HT022 3/4 in.(19mm).

Use the trimmer only for cutting normal shrubbery found around houses and buildings.

4. LEVEL HEDGES (Figure 12) – To obtain exceptionally level hedges, a piece of

string can be stretched along the length of the hedge as a guide.

5. SIDE-TRIMMING HEDGES (Figure 13) – Begin at the bottom and sweep up.

WARNING

TO GUARD AGAINST INJURY, OBSERVE THE FOLLOWING:

•

READ INSTRUCTION MANUAL BEFORE USING, SAVE INSTRUCTION

MANUAL.

•

KEEP HANDS ON HANDLES. DON'T OVERREACH.

•

DO NOT USE UNDER WET CONDITIONS.

•

DO NOT USE WITH DAMAGED EXTENSION CORD.

•

DO NOT UNPLUG OR STORE WITH SWITCH LOCKED ON.

DANGER: KEEP HANDS AWAY FROM BLADES.

CAUTION: BLADE COASTS AFTER TURN OFF.

Problem

•Unit will not start.

For assistance with your product, visit our website www.blackanddecker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

MAINTENANCE

The cutting blades are made from high quality, hardened steel and with normal usage,

they will not require resharpening. However, if you accidentally hit a wire fence, stones,

glass or other hard objects, you may put a nick in the blade. There is no need to remove

this nick as long as it does not interfere with the movement of the blade. If it does

interfere, unplug unit and while wearing proper eye protection use a fine toothed file or

sharpening stone to remove the nick.

If you drop the trimmer, carefully inspect it for damage. If the blade is bent, housing

cracked, or handles broken or if you see any other condition that may affect the

trimmer's operation, contact your local Black & Decker Service Center for repairs

before putting it back into use.

Fertilizers and other garden chemicals contain agents which greatly accelerate the

corrosion of metals. Do not store the tool on or adjacent to fertilizers or chemicals.

With the unit unplugged, use only mild soap and a damp cloth to clean the tool. Never

let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Prevent the blades from rusting by applying a film of light machine oil after cleaning.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment should be performed by authorized service centers or other qualified service

organizations, always using identical replacement parts.

2/19/09

9:22 AM

Page 7