Taurus Prius 1400 Manual De Instrucciones página 16

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
- Head for delicate floors: specially
designed for delicate floors, such as
parquet wooden flooring.
- Lance: specially designed for getting
into cracks and difficult corners.
- Multi-use brush (built into the lance).
- Upholstery brush: Especially suit-
able for cleaning textile surfaces
Use:
- Take the length of cable required
out of the housing.
- Connect the appliance to the mains.
- Switch the appliance on using the
on/off button.
Electronic power control:
- The power of the appliance can be
regulated by using the power regulator
control. This function is very useful,
as it makes it possible to adapt the
power of the appliance to the type of
work that needs to be done.
Once you have finished using the
appliance:
- Turn the appliance off using the on/
off switch.
- Unplug the appliance from the
mains.
- Retract the cable by pressing the
roller cable button and guide the
cable into the appliance.
Carry handle/s:
- The device has a handle on the
upper part so it can be transported
easily and comfortably.
Parking position:
- This appliance has two parking posi-
tions for comfortable and straightfor-
Manual Prius1400.indb 16
ward storage.
- To make use of the vertical park-
ing put the appliance in a vertical
position (so that the back part of the
appliance is now leaning against the
floor) secure the hook of the head to
the hook which can be found on the
lower part of the appliance (Fig. 2).
- To use the horizontal parking posi-
tion, fix the break pad hook to the
hook situated on the rear side of the
appliance (Fig. 3).
Safety trip switch:
- The appliance has a safety trip
switch that protects the appliance
from overheating.
- If the appliance turns itself off and
does not switch itself on again, dis-
connect it from the mains supply, and
wait for approximately 15 minutes
before reconnecting. If the machine
does not start again seek authorised
technical assistance.
Cleaning
- Disconnect the appliance from the
mains and let it cool before undertak-
ing any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
16
09/08/10 9:55
loading