Cleaning And Maintenance - melitta DeLuxe LOOK THERM Instruciones De Uso

display on the tank  you can choose the correct
number of cups. Small cup symbol = approx. 85ml
coffee per cup, large cup symbol = approx. 125 ml
coffee per cup.
• Close the lid on the water tank and place the therm
jug with closed lid in the appliance.
• Open the swivel filter  to the left.
filter bag 1x4
• Fold a Melitta
®
and place it in the filter holder.  Press the filter bag
into the filter holder by hand, to ensure a good fit.
• Put the ground coffee into the filter. The amount
depends on your personal taste. We recommend
using 6g of ground coffee per large cup.
• Swivel the filter back into the appliance. An audible
click tells you it is inserted properly.
AromaSelector
• With the Melitta
®
set the taste of your coffee with just one hand:
From mild-aromatic ( ) to strong-intensive (
• Turn the appliance on . Brewing begins.
• The appliance turns off automatically short after
brewing. This avoids unnecessary use of electricity
and saves energy. You can of course turn the machi-
ne off manually at any time.
• The drip stop prevents your coffee from dripping,
when you remove the pot from the appliance. 
• With the help of the detachable inner filter you can
dispose of the filter bag simply and easily.
5. Using the insulated pot
• The brewed coffee flows through the central valve in
the insulated lid of the pot.
• To pour coffee press down on the sealing lever .
• Remove the lid simply by pressing the seals on the
side while lifting the lid up .

6. Cleaning and maintenance

External cleaning
• The housing can be cleaned with a soft damp cloth.
• The jug lid, the filter insert and the swivel filter 
can be washed in the dishwasher.
Descaling:
The CALC button  lights up again if the appliance has
been turned off without descaling. The CALC
button will go off again only after the descaling
programme has been completely finished. (see point 7).
Based on the water hardness level you have set (see
point 3) the descaling programme should be run
promptly after the CALC button  lights up.
• Follow the manufacturers instructions regarding
amounts and pour the descaler into the water tank.
We recommend using Melitta
Machines.
• Briefly press the CALC button , it will start to flash.
• The descaling process will now run automatically.
To remove even stubborn limescale the descaling
process takes 25 minutes.
• Attention: Only by carrying out the descaling
process completely will all limescale deposits be
removed and the light on the CALC button will go
off. The descaling process should therefore not be
interrupted before it has run for the full 25 minutes.
• When the descaling process is completed the light
on the CALC button will go off. The appliance will
turn off automatically.
at the embossed seam
®
 you can
®
).
Anti Calc Filter Café
®
• At the end of the descaling process, the appliance
should be rinsed twice through, using the maximum
amount of water without coffee. This will remove
any remaining limescale deposits.
7. Notes on disposal
• Appliances labelled with this symbol
to European guidelines for WEEE (Waste Electrical
and Electronic Equipment.
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
are subject
GB
9