LG LSC20913TT Guía De Usuario página 13

Operation
How to adjust the
temperature in
the freezer
compartment
How to adjust the
temperature in
the refrigerator
compartment
Automatic ice
maker
13
1. Display Power Saving Mode
This function places the display into power saving mode until the next time the
door is opened.
Press the FREEZER and ICE PLUS buttons simultaneously and hold them for 5
seconds until the Ding sounds. All LEDs will then turn ON, then OFF. When the
power saving mode is activated, the display will remain off until the next time the
door is opened. Then, it will come on whenever a door is opened or a button is
pressed and remain on for 20 seconds after the last door opening or button
selection. To deactivate the power saving mode, press the FREEZER and ICE
PLUS buttons simultaneously and hold them for 5 seconds until the Ding sounds.
2. To change temperature display from Fahrenheit to Celsius press and hold
FREEZER and REFRIGERATOR buttons simultaneously for more than 5 seconds.
Do the same to convert back to Celsius.
You can adjust temperature of and freezer room and refrigerator room.
Freezer Compartment temperature adjustment
REEZER
Refrigerator Compartment temperature adjustment
RE RIGERATOR
To adjust the temperature in the refrigerator compartment, press the
REFRIGERATOR button to cycle through the settings of MEDIUM
COLDEST COOL
The actual inner temperature varies depending on the food status, as the
indicated setting temperature is the target temperature, not actual the
temperature within refrigerator.
Please adjust temperature as above after using the refrigerator for a minimum of
2~3 days.
The icemaker can automatically make 8 pieces of ice cubes at anyone time,
approximately 80 pieces per day. However these quantities may vary according to
certain conditions. E.g. the duration and amount of times the refrigerator door is
opened.
The Ice making proceeds ceases automatically when the ice storage bin is full.
If you choose not to use the automatic ice making function, repositioned the
icemaker selection switch to the off position or the on position for reselection. Note:
The manual selection function is only applicable to some models only.
NOTE
It is normal that a noise is produced when ice made is dropped into the ice storage
•
bin.
Setting
temperature
Setting
temperature
COOLER.
COLDER