Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to Use
This appliance is for household use only.
BEFORE USING YOUR KETTLE
Remove all packing materials, any stickers, and the plastic band around the power
•
plug.
To register your product, go to www.prodprotect.com/blackanddecker.
•
• Wash all parts as instructed in CARE AND CLEANING section.
• Select a level surface where this unit is to be used allowing enough space for
steam to escape without damage to counters, cabinets and walls.
• Fill kettle to maximum fill line with cold water. Bring to boil, discard and repeat.
Kettle is now ready for use.
Note: The kettle only operates when placed on the base with the ON/OFF (I/O)
button in the ON (I) position. The kettle automatically shuts off when water has
boiled or there is no water in the kettle.
Important:
• Do NOT fill the kettle with any substance other than water. Heat water only.
• Do NOT operate the kettle without water.
• Do NOT operate the kettle without the filter in place.
• Do NOT overfill the kettle. (Keep water level below the max fill line on the water
window.)
FILLING THE KETTLE
1. Remove the kettle from the base.
2. Press lid release button to open cover of kettle.
3. Make sure the removable filter is in place.
4. Fill with desired amount of cold tap water.
5. Press lid to close.
6. Unwind cord from base.
7. Place the kettle securely on the base.
BOILING WATER
1. Plug cord on the base into standard electrical outlet.
2. Press the On/Off (I/O) switch to the On (I) position. The power indicator light turns
on and the water begins to heat.
3. When water boils, the kettle and the power indicator light will automatically turn off.
Note: You can also turn the appliance off at any time by lifting the ON/OFF (I/O)
switch to the OFF (O) position.
Warning: Kettle filled with boiling water is hot. Use only the handle to pick it up.
When taking kettle to the table, carry kettle with caution to avoid spilling. Set it on a
trivet or hot pad to protect the table surface or tablecloth.
4
Important: Hold kettle handle firmly when pouring, especially when filled to the
max fill line. Do not pour too fast.
4. Unplug the kettle when not in use.
Note: This kettle has a boil dry protection feature that automatically turns the kettle
and power indicator light off when water has boiled or if there is no water in the
kettle.
BUILT-IN SCALE PROTECTION
Note: Lime scale forms over time in the kettle when water is heated. Though
harmless, it may be bothersome. The kettle has a removable filter behind the pour
spout to prevent particles from pouring into your beverage.
• Always have the removable filter in place just behind the spout when using the kettle.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service
personnel.
CLEANING
1. Before cleaning, be sure the base is unplugged and the kettle has cooled completely.
Empty any remaining water from the kettle.
2. Pull out the removable filter for cleaning. Wash the filter in hot, soapy water and
rinse or place it in the utensil holder of the dishwasher.
3. Wash the inside of the kettle with hot, soapy water and rinse.
Important: Never immerse the kettle in water or other liquids or place in a
dishwasher.
4. Wipe exterior of the kettle and base with a damp cloth or sponge and dry.
Note: The heating element at the bottom of the interior may discolor over time. This
will not affect performance. Do not use abrasive soaps, cleansers, or scouring pads on
the kettle.
Note: Over time, the kettle may heat up but will not boil. When this happens, it is
time for descaling.
To Descale
• Fill kettle with 4 cups cold tap water and bring to a boil.
Add 2 cups white vinegar, let stand for at least 1 hour or overnight and discard.
• Fill kettle to maximum fill line with cold water. Bring to boil, discard and repeat.
Kettle is now ready for use.
5
Tabla de contenido
