Connecting Batteries; Battery Charging; Determining Charging Sequence - Leica Geosystems GKL24 Manual De Empleo

Connecting batteries

Leica Geosystems GEB90 batteries have three contact
surfaces. The charger can differentiate between empty,
partly loaded and full batteries and adapt the charging
procedure accordingly.
WARNING:
For safety reasons, only Leica Geosystems GEB90
batteries may be connected.
Leica Geosystems GKL24 User Manual-1.0.0en

Battery charging

1. Connect charger.
2. Connect battery.
3. Ensure that the charging lamp is showing a solid yellow
light. The battery is now being charged. If the battery
lamp gives another signal after the battery has been
connected, see "Illuminated Display".
4. The battery is 80 % charged when the charging lamp
flashes green, when battery lamp is showing solid
green the battery is fully loaded. (for charge time ref. to
"Technical Data"; eg. for GEB90 after 2.5 h to 3.5 h)
5. The battery can now be removed for use or it may
remain connected so that it is available when required.

Determining charging sequence

If more than one battery is connected to the charger, they
are charged in the order that they have been connected.
For this reason, connect the battery that is most urgently
needed so that it has priority for charging.
9
Operation