Assembly - Home Decorators Collection HWGV4922 Guía De Uso Y Cuidado

Assembly

1
Adhering the basin
□ Apply a layer of silicone on the underside of the top (B)
along each basin cutout, where the basin (C) will be in
contact.
□
Lower the basin (C) onto the top (B), lining it up with the
cutout.
□
Wipe away any excess silicone.
3
Sealing the basin
□ Apply a bead of silicone sealant where the basins (C) meet
the top (B).
□
Use a clean rag to push in the silicone and wipe away
any excess.
2
B
C
4
B
C
4
Securing the basin
CAUTION: Do not over tighten the screws as this
could crack the basin.
□ Position the brackets (BB) so they clamp the basin (C) edge
to the top (B).
□
Thread the screws (AA) through the spaces in the brackets
(BB), then through the anchor in the top (B).
□
Tighten the screws with a screwdriver, turning it clockwise.
Applying the silicone
□ Wipe off the top edges of the vanity (A) that will be in
contact with the top using a clean rag.
□
Apply a layer of silicone along all of the top edges.
AA
BB
B
C
A