Maxon 296075-01 Manual De Instrucciones página 12

LIFT CORPORATION Sht. 12 of 56 DSG#
16. Connect hose (Kit item, P/N 282468-01) to
tee and top connector on hand pump (FIG.
12-1). Do not tighten connectors until later in
this procedure.
17. Remove plug from hand pump
port on pump block (FIG. 12-1).
18. Connect elbow (Kit item) to hand
pump port (FIG. 12-1). Position
elbow as shown.
19. Connect hose (Kit item, P/N 282467-01) to
elbow on pump block and bottom connec-
tor on hand pump (FIG. 12-1).
CAUTION
Hydraulic lines and fi ttings must
be torqued as shown in FIG. 13-1
and TABLE 13-1.
20. Reposition elbows, hoses, and tube assembly
as required (FIG. 13-1). Then, torque the fi t-
tings as shown in FIG. 13-1 and TABLE 13-1.
© MAXON Lift Corp. 2017
M-15-13
CONNECTING ELBOW AND HOSES
FIG. 12-1
Rev. C Date: 12/13/17