Tabla de contenido
Idiomas disponibles
Idiomas disponibles
M3.5 x 15 mm Screw
(4 used in this step)
Straight Metal Bracket
(2 used in this step)
27. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are tight
and there are no gaps between the parts. This will help keep the unit square.
28. Turn the previous assembly at its front edges.
29. Using the pilot holes as a guide, fasten two Straight Metal Brackets (8) at the joints between the Middle
Crossbar (M) and the Front Stiles (K and L) with two 15 mm Screws (7) per plate.
Assembly Instructions
⑦
⑧
24
Tabla de contenido
