Anthron AC-30 Manual Del Usuario página 2

WARNING:
A c t i v i t i e s a t h e i g h t a r e i n h e r e n t l y d a n g e r o u s .
Understand and accept the risks involved before
participating. You are responsible for your own actions and
decisions. Before using this product, read and understand all
instructions and warnings that accompany it and familiarize
with its proper use, capabilities and limitations. We
recommend that every climber seeks proper training in the
use of the equipment. Failure to read and follow these
warnings can result in severe injury or even death!
CHEST ASCENDER AC-30
According to EN 567 rope clamp AC-30 is tested to work on
kernmantle ropes of 8 to 13 mm that comply with the norms EN
1891, EN 892 or UIAA standards. According to EN 12841 Type B,
EN 1891 Type A compliant ropes of 9 to 13 mm must be used.
The devices were tested with the following ropes:
B e a l A n t i p o d e s 8 m m , Te n d o n 9 . 0 A S t a t i c , a n d
Tendon 13.0 Static.
ROPE CLAMPS ARE NOT DESIGNED TO ARREST A FALL!
ROPE CLAMPS ARE NOT DESIGNED TO ARREST A FALL!
NOMENCLATURE OF PARTS
CHEST STRAP
ATTACHMENT HOLE
CAM
SAFETY CATCH
HARNESS
ATTACHMENT HOLE
BREAKING STRENGTH
Depending on
rope diameter
min 4 kN
AC-30
WEIGHT DIMENSIONS (H x B x W)
teža dimenzije
gewicht ausmasse
140 g
peso dimensiones
STATIC REQUIREMENT ACCORDING TO
THE NORM EN 567 IS 4kN
STATIC TEST
teža
statisches test
test estático
Ø
dynamic rope
mm
8 5 kN
10 6,3 kN
11 6,6 kN
12
13
14 kN
AC-30
118 x 75 x 35 mm
low stretch rope
6 kN
6,5 kN
7,5 kN
7,8 kN
8 kN