HAMPTON BAY 56268 Guía De Uso Y Cuidado página 11

Assembly - Attaching the accessories
1
Attaching the switch cup adaptor
□
Remove one screw from the black bracket below the fan
motor assembly (D). Loosen, but do not remove the other
two screws (QQ).
□
Align the key hole slots in the switch cup adaptor (H) with
the two screws (QQ) in the black bracket.
□
Turn the switch cup adaptor (H) clockwise until the two
screws (QQ) are situated in the narrow end of the keyholes.
□
Re-install the one screw (QQ) that was removed in first
step. Tighten all three screws (QQ) firmly.
D
H
QQ
2
Attaching the switch cup
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
switch cup.
□
Remove one screw (UU) from the switch cup adaptor (H).
Loosen but do not remove the other two screws (UU).
□
Connect the molded adaptor plug of the receiver (NN) in the
switch cup (E) with the molded adaptor of the fan motor
assembly (D).
□
Aligning the "L" shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch cup
(E) to hold it in position.
□
Install the other screw (UU) that was removed in the first
step. Tighten all three screws (UU) securely.
D
11
Please contact 1-877-527-0313 for further assistance.
UU
H
NN
E
HAMPTONBAY.COM