Human Touch Immersion Seating Manual De Uso Y Cuidado página 4

get ready
Unpack the box
Chair Base Backrest
1. Attach the backrest to the chair base.
IMPORTANT: This step requires two people to prevent injury and/or damage to the backrest.
Using two people, lift the backrest into position on top of the chair base, aligning the track on the sides of
the backrest with the brackets on the chair base. Lower the tracks on the sides of the backrest carefully
onto both brackets simultaneously, keeping the backrest level, until the backrest clicks into place.
Backrest
Chair base
2. Attach the seat cushion.
Align and press the seat cushion firmly into position.
humantouch.com
Backrest Pad Seat Cushion Head Pillow
Seat Cushion
4
Setting up your Human Touch Massage Chair is easy.
onto the chair base, connect the two, attach the seat cushion, backrest pad,
and head pillow, and you're done!
3. Attach the backrest pad.
Zip the backrest pad to the backrest.
4. Attach the head pillow.
Zip the head pillow to the backrest pad.
NOTE: When enjoying a massage,
flip the head pillow and headrest flap
over the backrest to increase neck and
shoulder massage intensity.
5. Plug the backrest cable into the chair base.
Plug the backrest cable into the matching
socket located at the rear lower left corner of
the chair base. Using the Allen wrench and
Allen screw provided, install the screw into
the hole in the connector housing to secure
the connectors together.
Just slide the backrest
Head pillow
Allen screw
5
Backrest pad