Alarms Description - Cattani TURBO-SMART A Manual De Instrucciones

• Alarms description

Alarm code
AC80 AC80-07
00 0 Microcontroller memory alarm
I14 2 Amalgam level > 95%
I15 3 Amalgam level > 100%
I00 32
Microcontroller memory alarm
I01 33 Short-circuit due to one of the two motors
I02 34 Short-circuit before the motors' starting
I03 35 Condensers have not been charged
I04 36 Overtemperature (temperature has exceeded
the max. allowed limit)
I05 37 Blower overcurrent (the blower has
exceeded the current limit)
I07 39 Condensers overvoltage (the condensers
have exceeded the max. voltage limit)
S08 40 Centrifuge short-circuit
S09 41 PC-Board short-circuit on the centrifuge
output
S10 42 Centrifuge instant overcurrent (the centrifuge
has exceeded the current limit)
S11 43 Centrifuge time delayed overcurrent (the
centrifuge has exceeded the current limit)
I16 48 The vacuum detecting pipe is disconnected
I17 49 Centrifuge thermal switch switched-on
DESCRIPTION SOLUTION
Contact the technician
Replace the amalgam container as soon as
possible
Replace the amalgam container
Contact the technician
Identify where the short-circuit is coming from
and eliminate it
Contact the technician (the PC-Board is likely to
be damaged)
Contact the technician (replace the PC-Board)
Ventilate the plant room
Check the operation of the blower (seized or
excessive friction)
Check the mains voltage (max. 260V)
Eliminate the short-circuit
Replace the PC-Board
Eliminate siphons in the piping or check the
centrifuge operation (seized or excessive friction)
Eliminate siphons in the piping or check the
centrifuge operation (seized or excessive friction)
Connect the vacuum detecting pipe to the
centrifuge
Ventilate the room
35