CAUTION: Do not insert Bananas or avocados as they do not produce juice and will clog your
Power Juicer. You can blend these in a Blender and later add them to your juice.
6. Your Power Juicer will separate the Juice from the Pulp while operating.
7. To empty Pulp Container or Juice Container, turn the appliance to the "O" OFF position
before removing containers. Make sure to place both containers back before continuing to
Juice.
WARNING: Never use hands or Fingers to push food down in the Chute. ALWAYS use the
Food Pusher.
8. Once done unplug the appliance from the electrical outlet.
Cleaning Your Power Juicer:
WARNING: Always unplug the product and allow it to cool before cleaning or storing.
NEVER SUBMERGE THE BASE IN WATER OR ANY OTHER LIQUID
NOTICE: The Pusher, Chute, Pulp Guard, Pulp Container, Strainer/Blades, and Receptacle can
be washed in dishwasher top rack only or under running water.
1. Always unplug the product from the electrical outlet when it is not in use or will be left
unattended and before cleaning.
2. The Pusher, Chute, Pulp Guard, Pulp Container, Strainer/Blades, and Receptacle can be
washed using a nonabrasive sponge and soapy warm water. If the pulp has dried in pulp
container or strainer let it soak in water for approximately 10 minutes before cleaning.
NOTE: Some plastic parts might stain when it comes in contact
3. Dry all parts thoroughly before reassembling your Power Juicer.
4. Motor base can be cleaned with a damp cloth. Dry and store.
Troubleshooting:
Problem:
Juice Extractor will not work in the "I"
position
Motor makes a loud noise and unit
vibrates
Motor stalls when juicing / Pulp build
on Stainless Steel Strainer
Reduced Juice extraction/Juice leaks
between Rim of Juicer and Cover
Possible Solution:
*Safety Locking Bar was not positioned properly.
*Turn the appliance off and unplug the unit. Ensure
all parts were assembled correctly.
*Make sure all parts were cleaned correctly and
thoroughly.
*Turn off and unplug the appliance. Ensure all parts
were assembled correctly.
*Juicing overripe fruits may produce excessive pulp
and clog the filter.
If pulp starts building under the lid, slow down the
juicing process. Turn off and unplug appliance, clean
the strainer thoroughly.
Try a slower juicing action when using the Pusher.
5