• Always make sure the Juicer Lid is clamped securely in place before motor is turned on. DO
NOT unfasten clamps while Power Juicer is operating.
• Be sure to turn switch to the off position "O" after each use of your Power Juicer. Make
sure the motor stops completely before disassembling.
• DO NOT INSERT FINGERS OR OTHER OBJECTS INTO THE POWER JUICER OPENING WHILE
IN OPERATION, ALWAYS USE THE FOOD PUSHER PROVIDED. If food becomes lodged in the
opening, use the Food Pusher provided or another piece of fruit or vegetable to push it
through. *If this method does not work, turn the motor off, unplug the appliance from
outlet and disassemble the Power Juicer to remove the remaining food.
• Do not use the appliance if the Rotating Strainer / Filter is damaged.
• Make sure the appliance is properly assembled before operating. The unit will not turn on
unless it is.
SPECIAL INSTRUCTIONS:
of becoming entangled in or tripping over a longer cord. An extension cord is not
recommended for use with this product, but if one must be used:
− The marked electrical rating must be at least as great as that of the product
− Arrange the extension cord so that it will not drape over the countertop or tabletop
where it can be tripped over or pulled
WARNING: This product is equipped with a polarized plug (one blade is wider
than the other blade) to reduce the risk of electrical shock. This is a safety
feature. The plug will fit into a polarized outlet only one way. If you are unable to insert the
plug into the electrical outlet, try reversing the plug. If the plug still does not fit, contact a
qualified electrician. Never use the plug with an extension cord unless you can fully insert the
plug into the extension cord. Do not alter the plug. Do not attempt to defeat the safety
purpose of the polarized plug.
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there may be
accessory parts contained within the packaging material.
WARNING: Do not place the Motor Base in Dishwasher or submerge it in water.
1. Set your Power Juicer on a dry flat surface without plugging the appliance in the electric
outlet.
2. With warm soapy water wash all the parts of the Power Juicer, EXCLUDING the Motor
Base. Dry all parts thoroughly.
3. Assemble as pictured. 1) Motor Base 2) Add Receptacle 3) Insert Strainer/Blades and turn
into place 4) Add Pulp Container under Receptacle 5) cover with Chute and Pulp Guard
6) Lock Bar onto Pulp Guard Lid 7) Insert Pusher above Chute
A short power supply cord is provided to reduce the risk
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
3