Preparations For Use; Charging The Battery; Connecting The Battery; Assembling The Device - Rebel BTR170 Manual De Instrucciones

2 - Preparation for use

Charging the battery

• Store the battery charger in a cool and ventilated area.
• Plug the battery charger into the power outlet. SAFETY WARNING: make sure the power supply
source is compatible with the requirements indicated on the charger plate.
• Insert the battery it in the battery charger keeping it parallel. Do not force the battery since it should slide
easily in place. Any possible difficulty may indicate an incorrect alignment.

Connecting the battery

The device is delivered with a 14.4 V / 2.6 Ah battery power supply. To
connect the battery to the tool:
• Take the tool
• With the other hand, hold the battery so that the quick-release lever is facing downwards
• Insert the battery into place by sliding it upwards until the quick-release lever on the battery clicks.
It is required to use only the original battery to ensure proper operation of the device.

Assembling the device

SAFETY: BEFORE CARRYING OUT ANY INTERVENTION ON THE DEVICE, DISCONNECT
THE BATTERY
You have two assembly options:
• Fitting with specific mandrels (recommended for extended tool life)
• Fitting with standard Allen screws

Fitting with specific mandrels

34
3 18 kN
M3 M4 M5 M6 M8
5100086.xx
03 04 05
5100094.xx
– 04 05
5100087.xx
03 04 05
5100035.xx 04 05
–
18 22 kN
M8
5100097.08
06 08
06 08 –
5100087.08
06 08
06 08
–
M10
5100097.10
5100075.10