Proctor Silex 75217 Manual Del Usuario página 4

Using Your Can Opener
1. Place can opener on level surface.
2. Plug cord into electrical outlet.
3. Lift up piercing lever.
4. Place rim of can firmly under magnetic lid holder and against
geared wheel.
5. Tilt top of can in, to position cutting blade inside rim of can.
6. Press piercing lever all the way down.
7. The motor will begin turning can and cutting lid. (It is not neces-
sary to hold the piercing lever down or to hold the can during the
cutting action.)
8. The motor will stop automatically when the can is open.
Hints for Best Use
• The can opener will easily open all standard-size cans.
• On some models, it will be necessary to position can
opener at edge of counter, allowing for clearance to
open cans taller than the can opener. To ensure taller cans do
not fall from can opener, place hand under can.
• If there is a bump, dent, or heavy seam in rim of can, open other
end of can or start cutter just beyond it.
• Cans made with aluminum lids will not adhere to magnet.
• The motor of your can opener is permanently lubricated and will
require no oiling.
• To use cord storage on back of opener, push in or pull out cord
as needed.
4