Cleaning - oneConcept 10033030 Manual Del Usuario

Removing/inserting the dust bin
Removal: Push the release button on the dust
•
bin and take it out of the device by the handle.
• Insertion: Take the dust bin by the handle and
first place the bottom of the bin in the device
(the bottom is facing down and handle is facing
up). Then push the handle against the device
housing until the dust bin audibly locks into
place. Hold the device by the handle and lift it
to check whether the dust bin is properly seated.

CLEANING

Emptying the dust bin
1 Push the release button on the dust bin and pull it out of the device by
the handle.
2 Hold the dust bin over an open garbage bin. The dust bin should be as
close as possible to the garbage bin so that dust from the dust bin only
falls into the garbage bin and is not dispersed in the surrounding area.
3 Push the button to open the dust bin. The bottom of the dust bin will
open and the dirt will fall out.
EN
15