AVIRE Memco Panachrome G3850 Guia De Instalacion página 6

5. Menu Navigation
Language
English
French
German
Spanish
Japanese
Czech
Quick Config
G3510
G2510
G3540
G2540
Visible Diodes
Mode
Sides
Ext. Inp. Open
Ext. Inp. Close
Green On Time
Red On Time
Language selection
Quick Configurator for Product Versions
(2 = 2D, 3 = 3D) (10 = 10mm, 40 = 43mm)
Green ON when the detectors are triggered and the doors are
open/opening. Flashing red when the doors are closing and
Normal
solid red when closed.
Enables control of the visible diodes by the open and close
door signals. Choose whether this is activated by the rising or
External Inp.
falling edge of an external signal (see Section 6 for details).
Continual demo sequence of green and red diodes.
Demo
Visible diodes will change from green to red when the
Trigger
detectors are triggered.
For internal use only.
Test
Turns off visible diodes.
Off
Both On
This controls which detector, either TX or RX have their visible
diodes ON or OFF. The default is both TX and RX visible
TX only ON
diodes ON.
RX only ON
Rising Edge
Door open signal rising or falling edge signal (see Section 6 for
details).
Falling Edge
Rising Edge
Door closing signal rising or falling edge signal (see Section 6
for details).
Falling Edge
Sets green diodes on time (10 to 1000s)
Sets red diodes on time (2 to 1000s). Note: flashing/solid
combined on time.