Wiseup S818 Guia Del Usuario página 4

V. Setting Time/Date Stamp
5.1. Power off the camera, connect it to a proper PC computer USB port using the USB cable
attached.
5.2. Removable disk drive folder appears.
5.3. Click on the drive in the root directory and inside root directory, create a txt file named
"time.txt".
5.4. Write the current date and time in the "time.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2017.03.14 14:24:32). Save this file.
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera, connect it to an outlet AC power supply using the USB cable
and power adapter attached.
6.2. The red indicator light will stay on while the blue one will keeping flashing during the
charging process.
6.3. It will take 1 hour to obtain a full charge.
6.4. The red indicator light will stay illuminated when the camera is fully charged.
VII. Resetting
If, for any reason, the camera stops responding or isn't working properly, a quick reset will
restore it back to normal operation.
Operation: When the camera is powered on, use a pin to press the Reset Button once;
the camera will shut down automatically. Then you can restart the camera with the factory
default settings.