Wiseup S818 Guia Del Usuario página 3

1). A video clip will be generated and saved every 15 minutes automatically.
2). The camera can record video for 60 minutes continuously on a full charge.
3). Video Resolution: 720x480 Video Format: AVI
4). If the battery is low, the camera will save all video files then shut down automatically. The red
indicator light will flash once and then turn off.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
red indicator lights will be illuminated for 1 second, then the blue one will turn off while the
red one will stay on, indicating the camera has entered into standby mode automatically.
3.3.2. Press the Camera Button once to take a photo. Every time you take a photo, the
red indicator light will flash once.
3.4. MOTION DETECTION RECORDING
3.4.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
red indicator lights will be illuminated for 1 second, then the blue one will turn off while the
red one will stay on, indicating the camera has entered into standby mode automatically.
3.4.2. Press the Motion Detection Recording Button for 2 seconds to enter into motion
detection recording mode. Both blue and red indicator lights will flash 6 times and then
turn off.
3.4.3. The camera will record a 3-minute video automatically when motion is detected.
The blue indicator light will flash once then turn off.
3.4.4. Press the Motion Detection Recording Button to exit motion detection recording
mode. Both blue and red indicator lights will flash once, then the blue one will turn off
while the red one will stay on, indicating the camera is back to standby mode.
[Note]:
The camera can run up to 90 minutes when no motion is detected all long.
IV. Video/Image Files Uploads
4.1. Power off the camera, remove the Micro SD card then insert it into a card reader.
4.2. Insert the card reader into a proper PC computer USB port.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the drive.