Mounting The Furniture Door - Hoover BHTD H7A1TCE-S Manual De Instrucciones

2. MOUNTING THE
FURNITURE DOOR
Regulate the height of the
l
dryer The 4 adjustable feet
allow the height of the dryer to
be adjusted from 827 mm to a
maximum of 847 mm. To adjust
the height, you should rotate
the adjustable feet, ensuring that
the machine is level (figure 1).
Note: we suggest to put the
dryer at the maximum height
possible in order to avoid
tilting, leaving at least 5 mm
from the top of the furniture.
Before fixing the hinges it's
l
necessary to determine the
depth of the dryer from the
front part
according to the depth of the
kick plate (check picture) and
chose the
option (figure 2).
Option 1
The position of the plinth of
the dryer is set back less
than 54 mm from the front of
the furniture.
Position the template onto the
l
reverse of the furniture door. It
is possible to mount the hinges
and closure magnet on the right
or left-hand side depending on
your requirements. Mark the
screw hole positions, then drill
out these positions (figure 3).
of the kitchen
right installation
1
2
Option 1:
Option 2:
Note: that distance does not
consider the thickness of the
kickplate of the kitchen.
We suggest mounting the
furniture door so that it opens
towards the left, same direction
as the porthole door.
3
65