Removing The Battery And Sim/Microsd Card - Yezz ANDY 3G 4.0 Manual Del Usuario

2. Hold the SIM card with the cut corner oriented as shown
and slip it into the card holder.
3. Follow the OPEN arrow to push the metal slot, and flip it
up. Insert the card into the metal slot with the metal
contacts facing down until it clicks to the right position.
Flip the metal slot back and follow the LOCK arrow to lock
it.
NOTE: microSD logo
Card Association.
4. Insert the battery by aligning the gold contacts on the
battery with the gold contacts in the battery compartment.
Gently push down on the battery until it clicks into place.
5. Press the cover gently back into place until you hear a
click.

Removing the Battery and SIM/microSD Card

1. Make sure that your mobile phone is off.
2. Remove the back cover.
3. Lift the battery up and out.
4. Slide the SIM card out.
5. Slide the microSD card out.
is a trademark of the SD
20