Sangean RCR-7WF Manual Del Usuario página 33

5. Press the Tuning+/- buttons to set whether the alarm is for once,
everyday, weekly, weekdays or at weekends. Then press the
Set button.
Once - will sound at one time only
Everyday - will sound everyday.
Weekly - will sound once every week.
Weekdays - will sound on weekdays only.
Weekends - will sound on weekends only.
6. Press the Tuning+/- buttons to set whether the Alarm will sound with
FM radio, buzzer, Aux In, or Internet Radio.
When the Alarm sound is set for FM radio or Internet Radio, the lat
played station will be turned on to be the sounding. When the Alarm
sound is set for Aux In, please make sure there is a sound source
playing and connecting to the Aux In of this radio.
7. Press the Select button to finish the setting.
When the alarm sounds
1. The radio alarm will sound at the selected times for up to 60 minutes
unless cancelled. The volume for the radio alarm will be the same
as the volume previously used when listening to the radio or
media player. If for any reason the radio cannot connect to the
requested radio station at the time that the alarm is due, the buzzer
alarm will be used instead.
2. The buzzer alarm sounds for 60 minutes and the volume will gradually
increase from a low level.
3. If a radio alarm sounds and the radio is already playing, the radio will
change to the station specified for the alarm.
Activate and deactivate alarms
1. When Alarm 1 is activated, " " is shown on the display, same as
Alarm 2.
2. When the mark " " is shown on the display, press the Alarm 1
button to deactivate the Alarm 1, and "
Alarm 2.
3. To re-activate Alarm 1, press the button Alarm 1, and "
shown on the display, also the Alarm 1 information will be shown
as well.
" will disappear. Same as
"will be
GB
32