Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Heating power
indicator
Description
This thermostat can be used to control an electric heating system
such as a baseboard heater, a radiant ceiling, a radiant floor, a con-
vector, etc.
The thermostat cannot be used with the following:
•
a resistive load under 2 A
•
a resistive load over 12.5 A
•
systems driven by a contactor or a relay (inductive load)
•
fan-equipped heating systems
•
central heating systems
SUPPLIED PARTS
•
One (1) thermostat
•
Two (2) 6-32 mounting screws
•
Two (2) solderless connectors
Installation
TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN
POWER PANEL TO AVOID ELECTRIC SHOCK.
Loosen the screw holding the control module to the base. The screw
cannot be completely removed. Lift the control module to remove it
from the base.
Make the appropriate connections. Please note that the thermostat
wires are non-polarized; either wire can be connected to either termi-
nal.
RLV310
NOTE:
cal code. Special CO/ALR solderless connectors must be used when
connecting with aluminium conductors.
Temperature
display
Temperature
adjustment
2-wire installation
buttons
1.
4-wire installation
Align and affix the base to the
electrical box.
2.
Set the switch at the back of the remov-
able part of the thermostat to °C or °F.
Replace the front part of the thermostat
on the base and secure it in place with
the screw.
Keep air vents of thermostat clean and
free from obstructions.
All cables and connections must conform to the local electri-
69-1869ES
RLV310
User Guide
Electronic Thermostat
9/1/05
1/4
Manuales relacionados para Honeywell RLV310
Resumen de contenidos para Honeywell RLV310
- Página 1 RLV310 User Guide Electronic Thermostat NOTE: All cables and connections must conform to the local electri- cal code. Special CO/ALR solderless connectors must be used when Heating power connecting with aluminium conductors. indicator Temperature display Temperature adjustment 2-wire installation buttons...
- Página 2 This warranty does not cover removal or reinstallation costs. This - Supply: 120/240 VAC, 50/60 Hz warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the prod- - Minimum load: 2 A (resistive only) uct was in the possession of a consumer.
- Página 3 RLV310 Guía para el usuario Termostato electrónico Indicador de potencia de Indicador de calefacción temperatura Instalación de 2 cables Botones de ajuste de temperatura Descripción Este termostato se puede utilizar para controlar un sistema de cale- facción eléctrico, como un calentador de zócalo, un techo radiante, un piso radiante, etc.
- Página 4 Indicación y configuración de la temperatura Garantía Normalmente, el termostato indica la temperatura Honeywell garantiza por un período de un (1) año, a partir de la fecha de compra por el consumidor, que este producto, sin incluir las real (temperatura ambiente).