Esata Connection - Akasa elite Manual De Usuario

eSATA CONNECTION

NOTE:
Motherboard or adapter with SATA interface is required.
Connecting the Elite enclosure (eSATA mode)
1. Make sure the system is switched off.
2. Use supplied eSATA cable to connect the Elite enclosure to the motherboard's eSATA external port.
NOTE: If the port is not present on your motherboard you may need to install an eSATA adapter
(eSATA-45-EX).
3. Connect the DC power cord to the back of the enclosure making sure the round connector is aligned
correctly. Plug the power pack into an available AC socket and switch on the enclosure. Blue LED
should light up.
NOTE: Please ensure that you are using the supplied power pack only.
eSATA Connection
8