4.
Slide the side panels back into the aluminium housing.
5.
Line-up the connectors and gently insert the interface board onto the 3.5" SATA hard drive until the
connection is secure.
6.
Secure the enclosure backplate to the housing using the screws provided. You are now ready to
connect your SATA enclosure to the system. Choose connection you want to use (USB or eSATA) and move
to the corresponding chapter of the manual for further instructions.
NOTE:
Do not connect both (USB and eSATA) cables at the same time.
5
HDD Installation
OFF/ON
DC5V/12V
E-SATA
ESATA