Daytona HELMETS A2 Guia De Instalacion página 41

Use the Screw (E) to fasten the bluetooth module to the
helmet shell.
To use the BT device, it's necessary to pair it to the Bluetooth
device of your phone. While the device is switched off, hold the
control button (A) until the LED indicator begins flashing in Red
and Blue. The mobile phone will find the device under the
name SMK A-2. Select the SMK A-2 device and it will pair
automatically.
Switching on/off : press and hold the button (A) for a few
seconds until the speaker provides an acoustic signal and the
LED indicator C begins to flash. Blue flash means it is ON and
Red flash meas it is OFF.
The complete bluetooth system must be connected prior to
charging of the system.
Linking/Pairing
Switching ON/OFF
Charging
41