King gates JET Instrucciones Y Advertencias Para La Instalación Y El Uso página 19

Stop adjustment
The mechanical-stop enables to stop the gate at a required
position, avoiding the door to hit the stop devices.
• Set the gear-motor on manual override (FIG. 6).
• Twist off the screw of the mechanical-stop (B or D).
• Move the door to the desired opening/closing position.
• Place the mechanical-stop next to the sliding pin (C).
• Turn the screw tightly.
• Set the gear-motor on automatic functioning (FIG. 7).
FIG.9
m
WARNING: The gear-motors are normally provided
with mechanical stop in open position. In case of lack of
external mechanical stop in closing position, it is possible
to buy the optional mechanical stop.
m
ATTENTION: the front mechanical stop must not be in
contact with the engine cover.
Keep a minimum distance of 1 cm
19