Electrical Connection - King gates JET Instrucciones Y Advertencias Para La Instalación Y El Uso

Electrical connection

m
CAUTION
• A wrong connection can cause faults or danger; therefore
follow scrupulously the connections set out.
• Perform the connection operations when the electricity is off.
The actuator is provided with the assembled connector.
Disassemble the connector by unscrewing the screw "A", then
connect the wires according to the diagram below.
FIG.8
18
JET-24V
JET-230V
To check the connections, direction of rotation of the
motor, phase shift in the movement of the leaves and
setting the limit switch, refer to the instructions manual of
the control unit.
1 - MOTOR (+)
2 - MOTOR (-)
3 - NOT USED
- GROUND
1 - PHASE 1
2 - PHASE 2
3 - NOT USED
- GROUND