OZ Lifting Products OBH230 Manual Del Operador página 4

Important Information and Precautions
The information in this manual should be used only for the OBH MOUNTING ARM BRACKET. This
manual contains general instructions dealing with the normal installation, operation, and maintenance of
the product described herein. The information provided should not be expected to prepare the user for all
possible circumstances.
This product should not be installed, operated, or maintained by any person who has not read all the
contents of these instructions. Failure to read and comply with these instructions, warnings, or limitations
noted might result in bodily injury, death, or property damage. Contact the distributor for further explanation
if information is not fully understood.
It is the responsibility of the owner/user to install, test, maintain, and operate these products in accordance
with OSHA regulations, other federal, state, local regulations, and ANSI standards.
Only trained and qualified personnel shall operate and maintain this equipment.
Maintain Records
Schedule and maintain records of regular inspection and maintenance of the product in compliance with
ANSI standards.
Record your OBH MOUNTING ARM BRACKET's serial number on the front cover of this manual to allow
for easier referencing.
Precautions
Do not use the OBH MOUNTING ARM BRACKET in conjunction with other equipment unless the system
designer, manufacturer, installer, or user has put the necessary safety devices in place.
Modifications to upgrade or alter these products should only be authorized by the original manufacturer.
The OBH MOUNTING ARM BRACKET should be used for holding loads only within their load ratings.
Warnings
Failure to read and comply with the following warnings may result in a hazardous situation that
could lead to death, serious injury, or property damage. Be sure to properly install, operate, and
maintain the OBH MOUNTING ARM BRACKET so that it does not come off the beam.
Do Not lift more than the designated load range.
Do Not lift people or lift loads over people.
Do Not operate a damaged or malfunctioning product.
Do Not remove, deface, or cover warning labels.
Do Not operate until personnel are warned and cleared from the area.
Do Not use if load is not suspended vertically.
Do Not use the OBH MOUNTING ARM BRACKET without locking firmly in place.
Do Not use the OBH MOUNTING ARM BRACKET as welding ground.
Do Not use the OBH MOUNTING ARM BRACKET for a buffer or grab.
Do Not weld on the lifted load.
Do Not use the OBH MOUNTING ARM BRACKET in corrosive environments.
Do Not use connections between the OBH MOUNTING ARM BRACKET and OZ BUILDER'S HOIST.
Do Not allow the load to swing.
pg.4
EN