Channel Search; Channel Search- Diseqc 1.2 - InVento IDL-2000S Manual Del Usuario

5. Channel Search

5.1 Channel Search– DiSEqC 1.2
1. Antenna : Select the antenna number.
2. Satellite : Select desired satellite using Keys, Pressing
the OK key will also display a list of satellites. You can
view the information of the selected satellite on the
right side.
Edit Mode: If you wish to edit certain preprogrammed data
such as Transponder, Frequency, Symbol Rate, Polarization
and 22 KHz, press the Edit mode key (Red color key) on
the RCU.
3. Position : After selecting a satellite, please select the position
button and then keep pressing either E or W keys on the
RCU until the selected satellite is locked. If the satellite is
locked correctly, the color of the signal label bar will change
to yellow.
When you press the OK key on the RCU, the message "
Would you like to set the value of current position?" will be
displayed.
4. Transponder : Select desired transponder using the keys..
5. Frequency & Symbol Rate : Edit the Frequency and Symbol
Rate.
6. Polarization : Select Hor or Ver.
7. 22KHz : Select ON or OFF 8.
Search 1 SAT: Search channels for a single satellite, which
has been selected from the Satellite column.
Search TP: Search channels in a single TP, which has
been selected from the TP column.
Search Network: Search channels for the network related
to the TP.
Search all SAT: Search all channels at once on all satellites.
Inverto IDL2000S will automatically search for TV and Radio channels. During this procedure you can
view a list of the previously searched channels in the Searched list Box on the screen.
Once channel search is completed, the cursor will be placed on COMPLETE. Press the OK button to
confirm.
8. Set PID: If you want to set PID (Packet Identifier) manually,
select TP in the "Channel Search Page" and press the
MENU key on the RCU to display the command box.
Then select SET PID command and press OK. The set
PID menu will be displayed. Enter the correct value and
select OK.
9. Sat name edit: If you want to change the satellite name,
select the satellite and press Sat Name Edit key (Yellow
color key) on the RCU to display the command box. The
keypad dialog will appear. Using the arrowkeys on the
RCU, you can edit the satellite name. Delete TP : If you
wish to delete a Transponder, please select the Transponder
you wish to delete and then press the MENU key on the
RCU to display the command box. Select Delete TP
command and confirm.
12