Important; General Advice; Intended Use; Device Description - Beurer BY 52 Instrucciones Para El Uso

• The device must only be used on a mains socket with a residual-current protective device (risk of
electric shock).
• Unplug the mains cable after each usage and before any cleaning (risk of electric shock).
• Pull out the mains plug in the case of operational faults, before cleaning and when the device is not in use.
IMPORTANT: To avoid damage to the device, please observe the following:
• Fill the device with water before switching it on.
• Do not operate the device outside.
• The device must only be used on an AC network and with the voltage specified on the type plate.
• Unwind the mains cable fully in order to avoid overheating.
• Keep the mains cable away from hot surfaces.
• Do not place the device on water-sensitive surfaces.
• Do not remove the mains plug from the socket by pulling on the cable!
• Do not pull, twist or bend the mains cable.
• Never submerge the device in water. Never rinse it in running water.
• Do not use any additional parts that are not recommended by the manufacturer or offered as accessories.

General advice

• Repairs must only be carried out by Customer Services or authorised suppliers. Do not open or repair
the device yourself under any circumstances, otherwise its perfect functioning is no longer guaranteed.
Failure to observe this will invalidate the warranty.
• If you should have any questions about using our devices, please contact either your retailer or Custo-
mer Services.

4. Intended use

The device is intended for use in the domestic/private environment only, not in commercial situations. Only use
the device to warm up baby food/drinks and keep them warm. This device may only be used for the purpose for
which it is designed and in the manner specified in the instructions for use. Improper use can be dangerous. The
manufacturer is not liable for damage resulting from improper or careless use.

5. Device description

Overview
1 Lifter
2 Lid
3 Mains cable
4 MIN/MAX display
5 Control panel
6 Power LED
7 Heat LED
8 Time/Temperature display
9 Button for setting time and/or
temperature
10 On/Off button
11 Rapid heat-up button
1
2
3
8
9
10
11
11
4
5
6
7