Idiomas disponibles
Idiomas disponibles
8
NOTE: Make sure that the air outlets are properly
aligned to the ducts within the instrument panel
and that the foam seals on the outlets are properly
installed.
27. Obtain the new instrument panel center bezel included
in the kit and position each air outlet (2) to bezel (4).
28. Engage the four retaining tabs (1 and 3) that secure
each air outlet to the center bezel. Make sure the re
taining tabs are fully engaged to the outlet.
29. Position the new (ICS) screen module (2) included in
the kit into the bezel and install the retainers (1).
30. Position the center bezel into the instrument panel
opening and connect the harness connectors (2 &
3) to the rear of the Integrated Center Stack (ICS)
screen module (1).
Jan 02, 2012
K6861439
