Troubleshooting Guide - Porter Cable PCCW205 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English

Troubleshooting Guide

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at www.portercable.com for a list of service centers, or call the PORTER-
CABLE Customer Care Center at (888) 848-5175.
PROBLEM
Unit will not start.
-
Battery pack will not charge.
-
-
Unit shuts off abruptly.
Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a PORTER-CABLE
factory service center or a PORTER-CABLE authorized
service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
FOR YOUR sAFETY: Registering your product will allow us
to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.portercable.com/register.
THREE YEAR LIMITED WARRANTY
PORTER-CABLE will repair or replace, without charge, any
defects due to faulty materials or workmanship for three
years from the date of purchase for tools (two years for
batteries). This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.
10
POSSIBLE CAUSE
Battery pack not installed
-
properly
Battery pack not charged.
-
-
Internal componets too hot.
Brushes worn out.
-
Battery pack not inserted into
-
charger.
Charger not plugged in.
-
-
Surrounding air temperature
too hot or too cold.
-
Battery pack has reached its
maximum thermal limit.
-
Out of charge. (To maximize
the life of the battery pack it is
designed to shut off abruptly
when the charge is depleted.)
portercable.com or call (888) 848-5175. This warranty does
not apply to accessories or damage caused where repairs
have been made or attempted by others. This warranty
gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
In addition to the warranty, PORTER-CABLE tools are
covered by our:
1 YEAR FREE SERVICE: PORTER-CABLE will maintain the tool
and replace worn parts caused by normal use, for free, any
time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE: If you are not completely
satisfied with the performance of your PORTER-CABLE
Power Tool for any reason, you can return it within 90 days
from the date of purchase with a receipt for a full refund –
no questions asked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
To register your tool for warranty service visit our website at
www.portercable.com.
WARning lABEl REPlACEMEnT
If your warning labels become illegible or are missing, call
(888) 848-5175 for a free replacement.
4825 Highway 45 North
Jackson, Tennessee 38305
(888) 848-5175 www.portercable.com
POSSIBLE SOLUTION
Check battery pack installation
-
-
Check battery pack charging
requirements.
-
Allow tool to cool down.
Have motor replaced by an
-
authorized PORTER-CABLE
service center.
Insert battery pack into
-
charger until LED illuminates.
Plug charger into a working
-
outlet. Refer to "Important
charging notes" for more details.
-
Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4,5°C) or below 105
degrees F (+40,5°C).
-
Allow battery pack to cool
down.
-
Place on charger and allow to
charge.
Tabla de contenido
loading

Tabla de contenido