Technical Specifications; Charging Instructions - Atec 9004A Manual Del Propietário

o 4 feet with Trailer Connector
 Extension Cord:
o 2 feet with Trailer Connector + Battery Clamp or
o 2 feet with Trailer Connector + Ring Connector
ENVIRONMENTAL CHARACTERISTICS:
 Operating Temperature: 0 to 40° C
 Storage Temperature: -10 to 80°C
 Operating Humidity Range: 90% RH Max
 Cooling: Passive/ Natural

TECHNICAL SPECIFICATIONS:

Model Number
Type
Input Voltage Range
Input Frequency
Output
Start Voltage
Charge Voltage
Float voltage
Size (L*W*H) in mm
Weight
Approvals

CHARGING INSTRUCTIONS:

STEP 1 - Pre Charge Check & Electrolyte Level Check
 Check the Battery Electrolyte level (Not required on sealed & Maintenance Free
Batteries).
If necessary, remove the vent caps and add distilled water so the levels are halfway
between the upper and lower fill lines.
 Check the Voltage Output Switch on the charger and make sure it's on the correct
voltage
STEP 2 - Connecting the Battery charger to your Battery
 If the Battery is out of the vehicle:
o Connect the Red lead from the charger to the positive (+) battery terminal.
o Connect the Black lead from the charger to the negative (-) battery terminal.
 If Battery is still in the vehicle, determine if the vehicle is positively or negatively
earthed.
9004A
Smart
120Vac
50/60Hz
1500mA @ 12V
3V
14.4V
13.6V
140*65*36
0.45Kg
UL/cUL, FCC, BC
5