Tabla de contenido
To Switch the Lawn Mower On and Off
1. Connect the extension cord to the mower cord.
2. Connect the extension cord to the power outlet.
To prevent the lawn mower from being accidentally started, this machine
is provided with a safety system that needs both hands.
To switch it on, press the red button (1) and then pull the safety lever (2)
at the handle.
3. Press the ignition button with one hand (1) and use the other to
activate the safety throttle (2). This will start the engine of the lawn
mower.
4. The motor only works when the safety throttle is engaged and
automatically switches off when the lever is released.
5. To stop the mower release the throttle and the engine and blades will
stop.
How to Cut
Use the
Minimower
(with grass-catcher), cut the grass in a clockwise pattern, according to the illustration on
the right.
If your lawn is very high, avoid overloading the
engine by using only half of the mower on the grass,
as shown below.
ADDITIONAL INFORMATION
Replace the blade using the blade attaching set
1. Unplug the lawn mower.
2. Using a wrench loosen the bolt that mounts the blade to the
engine.
3. Remove old bolt and blade then attach the new blade as shown.
4. Reattach the bolt and tighten.
Contact
RAZARSHARP
for replacement
Note: Clean the motor compartment
every 15 hours of use.
Minimower
blades.
1
Support washer
2
5
Tabla de contenido
