Tabla de contenido
Before you plug in and operate your
•
Make sure you check the blade to make sure that it is secure.
•
Pick up objects from the lawn, such as: stones, roots, pieces of wood, glass or bricks. These objects can
damage your lawn mower and may also cause a serious accident.
Cutting Height Adjustment
Warning!
When adjusting cutting height, unplug
the lawn mower and check whether the
blade has come to a full stop before
adjusting it.
To adjust the cutting height, pull the wheel shaft to
the position desired, as in the figure:
1
2
To avoid engine overload, select the cutter edge height according to
yard condition.
For most types of grass used, it is recommended to keep them
between 2 and 3 inches high from soil. If lawn is excessively high, perform 2 or more cuts with different
height adjustments. This procedure will help to improve equipment life.
Extension Cord Support
•
There is a support assembled on the lawn mower handle to prevent the extension cord from being in the
same side of the safety lever.
To use this support, completely unwind the extension cord and proceed as follows:
•
Bend the extension cord and pass it through the opening (1) of the support. After that, loop it around the
hook (2).
•
Allow a loose fit between the safety support and the switch (3).
4
OPERATING INSTRUCTIONS
Minimower
Grass cutting height
1 - Higher
2 - Medium
3
3 - Low
1
3
2
1
2
3
3
2
1
Tabla de contenido
