Installing The Switch - Conceptronic C100S8A Manual Del Usuario

ENGLISH
The 10/100 Mbps Ethernet Switch comes with rubber feet and a wall mount kit. This allows you to use the
switch on your desk or mounted to the wall.
Desk usage:
• Stick the included rubber feet in each corner to the bottom of the switch. This will prevent the switch
from moving on your desk.
• Place the switch on your desk.
Wall mounted usage:
• Drill two holes into the wall with the same distance as the screw support holes located on the bottom
of the switch.
• Insert the nylon anchors into the holes in the wall.
• Insert the screws in the nylon anchors and fasten them with a screwdriver. Do not screw them
completely into the wall: you need some space to slide the switch onto the screws.
• Gently place the switch onto the wall with the front panel facing up or down by sliding the screws into
the provided slots.

4. Installing the switch

7