Inflator Operating Instructions - Goodyear i6000 Manual Del Operador

To inflate vehicle and bicycle tires:
1. Remove 12 Volt Inflator from carrying bag.
2. Connect the 12 Volt power cord into DC 12 Volt power outlet. (Please see Image #1 below).
3. Connect the Quick Connect Valve Adaptor to tire air valve by pushing the valve lever down until it is
securely attached to the tire air valve.
4. Move the On/Off switch to "I" position and the inflator will begin to operate. Monitor the PSI on the
gauge to fill your item to desired pressure. Once you have reached the desired air pressure, move the
On/Off switch to the "O" position.
5. Remove the air hose from the tire by lifting up on the valve lever. You will then lift the valve lever
upward and it will easily release from the valve you were inflating.
6. Remove the 12 Volt power cord from the DC 12 Volt power outlet.
7. Allow unit to cool.
8. Return 12 Volt Inflator to the carrying bag. Store accessories in the carrying bag.
To inflate sports ball, air mattress, rubber raft, etc.:
1. Remove 12 Volt Inflator from carrying bag.
2. Connect the 12 Volt power cord into DC 12 Volt power outlet. (Please see Image #1 below).
3. Select the appropriate inflation accessory and insert onto end of the Quick Connect Valve Adaptor.
(Please see Image #2 below).
4. Insert the inflation accessory into desired item you are inflating.
5. Move the On/Off switch to "I" position and the inflator will begin to operate. Inflate your desired item to
the correct pressure and move the On/Off switch to the "O" position.
6. Remove inflation accessory from Quick Connect Valve Adaptor.
7. Remove the 12 Volt power cord from the DC 12 Volt power outlet.
8. Allow unit to cool.
9. Return 12 Volt Inflator to the carrying bag. Store accessories in the carrying bag.
Image #1

INFLATOR OPERATING INSTRUCTIONS

DO NOT OVER-INFLATE ITEM BEING INFLATED. FOLLOW MANUFACTURERS
SUGGESTED PSI LEVELS ON ITEM YOU ARE INFLATING.
Image #2
5