Symbols - Kobalt A081002 Manual Del Usuario

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOLS
V Volts
A Amperes
Hz Hertz
Wh Watt Hour
Ah Amp Hour
~ Alternating Current
Class II Construction
RPM Rotating Speed
/min Per Minute
Wet Conditions Alert
Read The Operator's
Manual
Eye Protection
Safety Alert
Hand and Feet
Safe Distance
Stop the Machine
Moving Parts
Objects
Hand and Feet
Hand
The power
The power
NAME
Voltage
Current
Frequency (cycles per second)
Energy Storage Capacity
Current Capacity
Type or a characteristic of current
Double-insulated construction
Revolutions per minute
Revolutions, strokes, surface speed, orbits, etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Precautions that involve your safety.
Keep hands and feet away.
Keep bystanders a safe distance from the machine.
Stop the motor and disconnect the power supply before
leaving the machine.
Stay away from moving parts. Keep all guards and shields
in place.
Thrown objects can ricochet and result in personal injury or
property damage.
Keep hands and feet away from rotating impeller.
Keep hands away from the discharge area.
Always keep the power cable away from heat sources, oils
or sharp edges. Immediately remove plug from the mains if
the cable is damaged or entangled.
WARNING! Turn the machine OFF and disconnect it from
the power supply before inspecting, cleaning, changing
accessories or conducting any other maintenance task.
DESIGNATION/EXPLANATION
4