Care And Maintenance - Kobalt A081002 Manual Del Usuario

CARE AND MAINTENANCE

1. REPLACING THE IMPELLER
NOTE: When replacing worn impellers, pay close attention to any different types of bolts and nuts
and where they are positioned. This will ensure that the new impellers are installed properly and
securely.
• Detach the worn impeller by removing the sets of
nuts, bolts and washers used to secure it.
• Install the first replacement impeller and insert the
appropriate bolt into the corresponding holes on
each part of the impeller. Make sure the lock-nuts
are firmly secured to the bolts. Install the other
impeller in the same manner.
2. REPLACING THE SCRAPER BAR
The scraper bar is located at the base of the snow
thrower beneath the rotor housing.
• Remove the screws that secure the scraper to the
snow thrower.
The sets of nuts, bolts and washers
Scraper bar
15