Advice On Use; Replacing The Dust Bag; Replacing The Filter - Lervia KH 1400 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Manual.qxd
24.02.2003
14:01 Uhr

Advice on use

1.
Floor brush
Press the button to set the floor brush for use on floors and smooth or flat surfaces. This is for cleaning PVC, floor-boards, marble, sandstone,
parquet etc. Place the button to its original position again when you wish to use the brush for carpets or soft surfaces.
2.
Nozzle on hose grip
Remove the wand and work just using the nozzle on the hose grip to vacuum curtains, lampshades, shelves or car seats etc.
It is particularly useful for cleaning soft materials.
3.
Crevice adapter (multi-purpose crevice nozzle)
Take the crevice adapter from the accessory holder (at the rear of the cleaner near the plug). Use this nozzle to reach places that are
difficult to get into, such as curtain rails, recesses, corners and narrow openings. When using this tool you can simply swivel the front
brushes in or out to adjust the way the crevice nozzle works to suit your cleaning task.
This tool can either be fitted to the nozzle on the hose grip or on the end of the wand.

Replacing the dust bag

1.
The red indicator lets you know when the dust bag is full and needs to be changed.
2.
Detach the hose by pressing the two buttons at its end.
3.
Press the (open/close) button to open the housing cover.
4.
Take the container with the dust bag out of the compartment.
5.
Remove the full dust bag from the holder.
6.
Place a new dust bag into the holder.
7.
Place the container with a correctly fitted dust bag back into the compartment.
8.
Close the housing cover.
9.
Always check that the dust bag is correctly installed before switching on the vacuum cleaner again.

Replacing the filter

Before you install a new filter, always switch off the vacuum cleaner and pull the plug out of the socket. We recommend that the filter
is changed at least after every 5th dust bag. Two replacement filters are included with the vacuum cleaner.
1.
Replacing the air inlet filter
- Open the housing cover.
- Take out the filter with the old dust bag.
- Insert the new filter.
Seite 11
gb
11
Tabla de contenido
loading

Tabla de contenido