SIT Group 822 NOVA Manual Del Usuario página 7

IMPORTANT:
At the end of all setting and adjustment operations, check electrical insulation, gas seals and the efficiency of
the appliance. In particular, check that flame lift or light back are impossible. After carrying out all adjustments,
fit the provided seals and/or block the setting screws with paint.
MAINTENANCE
The only maintenance operation permitted is the replacement of the coil of the automatic solenoid valves EV1
and EV2. This operation must be carried out by qualified personnel only and according to the instructions
provided in the valve catalogue and in the instruction leaflet supplied with the spare parts.
ACCESSORIES
Connector for EV1 type 002 L = 540 mm
Fixing screw for type 002 connector
Connector for EV2 type 160 L = 1000 mm
Seal and screw for type 160 connector
Double connector for EV1 and EV2 with seal and screw
Plug for pilot outlet
Olive connector for connection to pilot burner with
Fitting for connection to the combustion chamber
Fitting for connection to the combustion chamberwith Ø 0.18 nozzle
Other accessories are available on request
Ø 4 mm pipe
Ø 6 mm pipe
Ø 1/4" pipe
0.960.120
0.960.125
0.960.103
0.960.104
0.960.123
0.972.041
0.958.030
0.958.031
0.958.032
0.958.057
0.958.058
7