Salamander Designs D2/347AMxl Guía De Montaje página 6

INSTALL display BRACKETS Continued
Using the key slots provided on mount face, slide display into place.
ADJUSTING DISPLAY TILT ANGLE (OPTIONAL
Mount tilt is preset at factory. If adjustment is necessary,
remove display, loosen bolts (T) and adjust bolts (K) in three
locations to achieve proper tilt. Do not over tighten screw (T).
Adjusting screws (K) will tilt mount. Screws (T) hold mount
in desired position
K
Salamander 4 Bay Cabinet with XL Display Mount
WARNING!
Side View
This step requires two people.
6 of 28
)
T
K
501-020 [9.17]