Set W Lamp; Set Printer; Set Time & Date - J.P. SELECTA UV2005 Manual De Instrucciones

INSTRUCTION MANUAL CODE 80243 REV A
Figure 42
Figure 43
Figure 45
J
.P. SELECTA s.a.
January/11

7.2 Set W Lamp

Move the cursor onto W Lamp on/off by pressing [»] and [«] in utility
setting screen, and then press [ENTER] to go into W lamp controlling screen. (Fig. 43)
Move the cursor on OFF to shut off the W lamp by pressing [»] and [«] followed by
[ENTER]. The icon "" will also be displayed at the end of OFF.
Press [RETURN] to exit.
Move the cursor onto On to lighten the W lamp by pressing [»] and [«] followed by
[ENTER]. The icon "" will also be displayed at the end of ON. Press [RETURN]
to exit.
Shutting off W lamp is strongly recommended when you don't use it after self-testing.

7.3 Set Printer

Move the cursor onto Printer by pressing [»] and [«] in utility setting screen, and
then press [ENTER] to go into printer setting screen. (Fig. 44)
Move the cursor on Printer Style by pressing [»] and [«] in printer setting screen,
and then press [ENTER]. (Fig. 45)
If your printer is outside the instrument, choose Table Style in the down display of
Fig. 45; and if your printer is inside your instrument, choose Panel Style.
Move the cursor onto Scroll Paper by pressing [»] and [«] in the printer setting
screen and then press [ENTER]. Repeat the operation, till the new changed paper
spread out.
Move the cursor onto Reset by pressing [»] and [«] in the printer setting screen
and then press [ENTER]. The printer will be reset.
7.4 Set Time & Date
Move the cursor on Time and Date by pressing [»] and [«] in the utility setting
screen, and then press [ENTER] to go into time and date setting screen. (Fig. 46)
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
(It can be modified without notice)
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page: 49